Polyurethane bridle rolls offering a wide range of durometers and surface finishes to achieve the highest co-efficient of friction with the best roll life.

Specially formulated material designed to handle very high loads without damage to the urethane covering and the urethane bond to steel core.

Polyurethane covered blade rolls for the fiberglass chopping industry. These rolls are inexpensive and have a quick turnaround for recovering. Any spacing can be made.

Specially formulated table and bed roll conveyor covers designed to minimize urethane shaving from lead edges and sharp edges. Coverings are formulated for heavy abuse in the looping conveyor area.

Custom conveyor coverings to any size diameter and face length. Diameters can be made to odd sizes or cast finished to standard diameters.

Custom conveyor coverings to any size diameter and face length. Diameters can be made to odd sizes or cast finished to standard diameters.

Polyurethane plates with steel backing. The steel can have a border for welded attachment or countersunk bolt holes for bolt attachment.

Polyurethane plates with steel backing. The steel can have a border for welded attachment or countersunk bolt holes for bolt attachment.

Side trimmer chute liners are made to cut down noise from side scrap and protect the trimmer chute from damage. Liners are made to fit in the trimmer chute.

Urethane stabilizer used in the oil drilling industries .Universal Urethane can make your key drilling parts by reverse engineering your existing part. No prints are required. Universal Urethane uses a specially blended material to hold up to the toughest applications.

Polyurethane V-rolls are designed to be slid over a steel core. These rolls can be kept in stock and the covering can be quickly changed.

Custom Polyurethane "V" roll for steel pipe and tube industry. We can make covering bonded to metal core or in the form of a sleeve for field installation.

Original manufacturer of no-crush feed rolls for corrugated box industry. All sizes for all types of folding box equipment.

Gears made from urethane are low cost in comparison to metal and plastic gears. Urethane gears will shear when a machine jams saving further machine damage.

Custom molded polyurethane hammers and mallets for all industries. The urethane offers a non-sparking head and superior life to rubber hammers and mallets.

Polyurethane core plugs are inexpensive in comparison to machined plastic and last practically forever. Core plugs can be molded in any custom shape and size.

Polyurethane suction cups for can manufacturing and plate glass handling. Standard sizes available and custom molded cups can be made.

Polyurethane roll coverings for conveyor rolls designed to be pressed on steel roll. Roll coverings can be kept in stock and roll does not need to be sent in for recovering.

Polyurethane covered belt pulleys are made with or without crown for belt guidance. Rolls can be made with a rough finish for grip.

Guide wheel coverings are designed for high speeds and high load bearing capabilities.

Drive wheels for belt sanders in either dry or water environments. Rolls can be grooved and tapered for added grip. Urethane belt sander wheels outlast rubber wheels by about 8 times.

Custom designed coil supports to replace wooden supports. Polyurethane coil supports are oil and cut resistant and can be made in various colors for safety.

Custom designed coil blocks to replace wooden supports. Polyurethane coil blocks are oil and cut resistant and can be made in various colors for safety. Coil blocks can also be used to store work rolls.

Polyurethane slitter rings are oil and cut resistant for increased life without swelling. Rings can be made in dual durometers and any color.

Polyurethane chute liners custom made to fit any chute. Durometers from 75 shore “D” to 80 durometer shore “A”.

Rack liners made to transport plate glass and solar panels. Rack liners are formulated to resist wear and tear from sharp edges on plate glass and solar panels.

Polyurethane dunnage parts for the auto and plate glass industries. Dunnage parts are used for transportation and storage.

Polyurethane slitter spacers can be made in ring form or bonded directly to a metal hub. Tight tolerances are held on the width and on the inside of the rings.

Polyurethane slitter spacers can be made in ring form or bonded directly to a metal hub. Tight tolerances are held on the width and on the inside of the rings.

Custom size polyurethane tubing for protection and roll covering usage. We can custom make tubing to any size inside or outside diameter.

Polyurethane filler sleeves and expander rings used to quickly buildup any reel to another diameter. Available with gripper bar slots if needed.

Polyurethane chopper cots for fiberglass chopping industry. We have specially designed formulas for long cot life and high quality glass cut.